How to read a vape spec sheet

mAh, ohms, watts, TPD and pod platforms, explained one line at a time with real spec sheets as examples.

Illustration: coil diagram

6 min read

Spec sheets use the same handful of terms everywhere. Once you know them, comparing devices takes minutes.

Battery (mAh)

Milliamp-hours measure charge capacity. Usable capacity is usually lower than rated: Vaping360 measured about 850 mAh usable from the XROS 4’s 1000 mAh battery.

Resistance (Ω)

Coil resistance, in ohms, is printed on the pod. Lower resistance pods draw more power. Many devices read the pod and set power automatically.

Output (W) and modes

Some devices let you set wattage directly (the Caliburn G3 goes up to 25 W); others offer a few fixed modes (the XROS 4 has three).

Pod capacity and TPD

In the EU and UK, the Tobacco Products Directive limits refillable tanks and pods to 2 ml, so the same device is often sold with a smaller pod there. Spec sheets usually list both figures.

Pod platform

Check which pods a device accepts. The XROS 4 takes every XROS pod; the Caliburn G3 uses Uwell’s G3 pod platform.

Keep reading

Sources

  1. Vaporesso XROS 4 and XROS 4 Mini review, Vaping360. Accessed 2026-11-17.
  2. Vaporesso XROS 4 Pod Vape Kit, Vape UK. Accessed 2026-11-17.
  3. Uwell Caliburn G3 review, ECigClick. Accessed 2026-11-17.

VapeReviewHub is independent. We don’t sell products, carry sponsored content or accept payment for coverage. This article is not medical advice.